Product Specifications

General Technical Specifications
Scanner Type		Single Sheet, Simplex, Color Scanning with CDF (Continuous Document Feeding)
Scanning Modes		Color / Grayscale / Monochrome / Automatic Detection
Image Sensor		CIS (Color Image Sensor) X 1
Light Source		3 color LED (Red / Green / Blue)
Optical Resolution		600 dpi
Scanning Speed(1)  (A4 portrait / AC adapter)	Auto Mode(2)	Simplex:  7.5 seconds per page
	Normal Mode	7.5 seconds per page
	Better Mode	7.5 seconds per page
	Best Mode	7.5 seconds per page
	Excellent Mode	35 seconds per page
Scanning Range	Normal Mode	A4, A5, A6, B5, B6, Business card, Post card, Letter, Legal and Custom sizes.  Max: 216 mm x 360 mm (8.5 in. x 14.17 in.),  Min: 25.4 mm x 25.4 mm (1 in. x 1 in.), Automatically recognizes document type by paper length.
	Normal Mode with  Carrier Sheet	Use of a carrier sheet permits the scanning of A3, B4, 279 mm x 431.7 mm (11 in. x 17 in.) and photographs as well as the document sizes that are listed above
	Long Paper  Scanning(3)	Max: 216 mm x 863 mm (8.5 in. x 34 in.) (300 dpi or less)
Paper Weight (Thickness)		Paper: 52 g/㎡ to 209 g/㎡ (14 lb. to 56 lb.) (Straight path)  Paper: 52 g/㎡ to 80 g/㎡ (14 lb. to 20 lb.) (U turn path)  Card: Portrait or Landscape (Straight path)  Non-embossed: 0.76 mm or less  Embossed: 0.76 mm + 0.48 mm
Paper Setting		Front-side up
Interface(4)		USB 2.0 (USB 1.1 Compatible)
Power Requirement		5 V / 0.5 A (1 Port)
Power Consumption		Operating: 2.5 W or less  Sleep mode: 1 W or less  During Auto Standby (OFF) mode: Less than 0.5W
Operation Environment	Temperature	5 °C to 35 °C (41 °F to 95 °F)
	Relative Humidity	20 % to 80 % (non-condensing)
Dimensions (W x D x H)(5)		273 mm x 47.5 mm x 34 mm (10.74 in. x 1.87 in. x 1.33 in.)
Device Weight		350 g (0.77 lb. or 12.34 ounces)
Environmental Compliance		ENERGY STAR® Compliant / RoHS
Driver		ScanSnap specific driver (TWAIN/ISIS® not supported)
Inbox Contents		Getting started, Set-up DVD-ROM, USB cable (2.0 m)

1. Scanning speeds may vary due to the system environment used. Scanning speed means the time from "Start feeding document" to "Finish output document" after pre-pick and pushing Scan button. In case of 'From pushing Scan button', Warm-up time is added. *Warm-up time Less than 2 seconds from ready status (Less than 3 seconds after opening chute cover).
2. Documents measuring approximately 148 mm in length or less are scanned in 'Best Mode', while other documents are scanned in 'Better Mode'.
3. The S1100i is capable of scanning documents that exceed A4 size in length. This function is available for all modes except 'Excellent mode'.
4. Computer with USB 3.0 will work as USB 2.0 guaranteed only with USB cable provided with product.
5. When the paper output guide is in the folded position.

System Requirements for PC

 

Compatible  Operating  Systems		Windows®
		10 / 8.1 (32-bit / 64-bit)(1)	8 (32-bit / 64-bit)(1)	7 (32-bit / 64-bit)	Vista® (32-bit / 64-bit) SP2 or later
Interface  /Applications(2)	ScanSnap Manager V6.5L60 or later	Supported	Not supported	Supported	Not supported
	ScanSnap Manager V6.5L40	Supported	Supported	Supported	Supported
	ScanSnap Organizer V5.6L40 or later	Supported	Not supported	Supported	Not supported
	ScanSnap Organizer V5.6L20	Supported	Supported	Supported	Supported
	ScanSnap Receipt V1.5L41 or later	Supported	Not supported	Supported(3)	Not supported
	ScanSnap Receipt V1.5L40	Supported	Supported	Supported(3)	Supported
	CardMinder™ V5.3L40 or later	Supported	Not supported	Supported	Not supported
	CardMinder™ V5.3L30	Supported	Supported	Supported	Supported
	ABBYY FineReader for ScanSnap™ 5.0	Supported	Supported	Supported	Supported
	ABBYY FineReader for ScanSnap™ 5.5	Supported	Supported	Supported	Supported
	Scan to SharePoint® 3.4 / 5.0	Supported	Supported	Supported	Supported
Hardware  Requirements(4)	CPU(5)	Intel Pentium® i5 2.5 GHz or higher
	Memory Capacity(5)	4 GB or more
	Display	1,024 x 768 pixels or higher		800 x 600 pixels or higher
	Disk Capacity(6)	3.5 GB or more of free hard disc space
	DVD ROM Drive	Required for installation(7)
	USB Port(5)(8)	USB 3.0(9) / USB 2.0 / USB 1.1

1. Operate as a desktop application.
2. Operating systems listed in this table are the only ones supported. Please refer to the ScanSnap Support sitefor the latest support information.
3. Requires Service Pack 1.
4. The ScanSnap device may not work if the connected computer does not meet these requirements.
5. Scanning speeds may drop if recommended CPU, memory capacity and USB 1.1 requirements are not met.
6. Microsoft .NET Framework 3.5 SP1 will be installed (requires 500 MB of disk space) together with ScanSnap Manager, ScanSnap Organizer or CardMinder for systems that do not have .NET Framework 3.5 SP1 installed. When using “Scan to Google Drive” with ScanSnap Manager/ScanSnap Organizer, users also need to install either .NET Framework 4 or in-place updates of .NET Framework 4.
7. If you have no DVD-ROM drive, please visit the ScanSnap Support site.
8. ScanSnap operates on both USB 2.0 and USB 3.0 without any difference in performance.
9. Some computers do not recognize the ScanSnap when it is connected to a USB 3.0 port. In this case, please use a USB 2.0 port.

*System requirements may change depending on the duration of support and the support policy of the companies that make the software listed in the table above.

System Requirements for Mac

Compatible  Operating  Systems		macOS v10.12(1)	OS X v10.11  v10.10	OS X v10.9(2)	OS X v10.8(3)	Mac OS X v10.7(4)
Interface  /Applications(5)	ScanSnap Manager for Mac V6.3	Supported	Supported	Supported	Supported	Supported
	ScanSnap Organizer for Mac V1.1	Supported	Supported	Supported	Supported	Supported
	ScanSnap Receipt for Mac V1.5	Supported	Supported	Supported	Supported	Supported
	CardMinder™ for Mac V5.2	Supported	Supported	Supported	Supported	Supported
	ABBYY FineReader for ScanSnap™ 5.0	Not supported	Supported	Supported	Supported	Supported
	ABBYY FineReader for ScanSnap™ 5.5	Supported	Supported	Supported	Not supported	Not supported
Hardware  Requirements(6)	CPU(7)	Intel® Core™ i5 2.5 GHz or higher
	Memory Capacity(7)	4 GB or more
	Display	1,024 x 768 pixels or higher
	Disk Capacity	2.5 GB or more of free hard disc space
	DVD ROM Drive	Required for installation(8)
	USB Port(7)(9)	USB 3.0(10) / USB 2.0 / USB 1.1

1. macOS v10.12.1 or later recommended.
2. OS X v10.9.5 or later recommended.
3. OS X v10.8.5 recommended.
4. Mac OS X 10.7.5 recommended.
5. Operating systems listed in this table are the only ones supported. Please refer to the ScanSnap Support sitefor the latest information.
6. The ScanSnap device may not work if the connected computer does not meet this requirement.
7. Scanning speeds may drop if recommended CPU, memory capacity and USB 1.1 requirements are not met.
8. If you have no DVD-ROM drive, please visit the ScanSnap Support site.
9. ScanSnap operates on both USB 2.0 and USB 3.0 without any difference in performance.
10. Some computers do not recognize the ScanSnap when it is connected to a USB 3.0 port. In this case, please use a USB 2.0 port.

* System requirements may change depending on the duration of support and the support policy of the companies that make the software listed in the table above.

 

1.3 Carry-in repair service Carry-in service is a service program in which a defective Product must be returned to FAPL’ s Service Center for repair. Service will be provided during Maintenance Hours. Carry-in service includes the provision of spare parts, labor and one-way courier charge for the return of the repaired Product. Obtaining Service a. In the event of a hardware failure, Purchaser must call in FAPL’s Technical Assistance Center (TAC). TAC will assist the Purchaser in resolving the problem over the telephone. b. Purchaser must provide TAC with the product model number, part number, serial number and a description of the problem. c. Purchaser may be asked to run some simple, self-diagnostic tests and report the resulting status and error code messages. This will assist TAC in determining if the problem is the Product or another component of the Purchaser’s system and if the problem can be resolved over the telephone. d. After TAC verifies a hardware problem over telephone assistance, a Carry-in service will be initiated and TAC will provide instructions for Purchaser to send the defective Product to FAPL’s Service Center for repair. e. Before the defective Product is sent to FAPL, Purchaser must ensure that all options and accessories (which include power cord, documentation, CD/DVD, etc.) are removed. FAPL does not accept responsibility for these items and they will not be returned with the repaired Product. The Product should be returned to FAPL in its original packaging and all risks and expenses in relation to the defective Product shall be borne by the Purchaser. Upon successful repair, FAPL will deliver the Product to the Purchaser during the Maintenance Hours. 1.4 Preventive Maintenance Where expressly indicated in the ScanShield Certificate, FAPL shall perform preventive maintenance at the Site. Preventive maintenance shall be provided at such frequency as set out in the ScanShield Certificate as FAPL in its sole and absolute discretion considers necessary to ensure the Product remains in good working order. Preventive maintenance will be provided during Maintenance Hours at a time to be mutually agreed upon between FAPL and Purchaser within 2 weeks of initiation. Preventive maintenance includes: • Thoroughly cleaning the paper feeding path of the Product • Checking the consumables status to advise the Purchaser whether or not it is due time to change the consumables • Updating the Purchaser on the condition of the Product Preventive maintenance excludes: • Maintenance Training • Consumables • Cleaning materials • Troubleshooting of software configuration, applications or set up 2 ENGINEERING CHANGES AND ENHANCEMENTS FAPL may with the approval of Purchaser, from time to time make engineering improvements or install in the Product such engineering changes and enhancements which it deems necessary to incorporate in the Product. FAPL may also determine from time to time that certain safety changes are required for installation in the Product and FAPL shall have the right upon obtaining the Purchaser’s approval thereof, to install such safety changes and to select the method of installation of such changes. The Purchaser shall pay an additional charge (if any cost or charge is imposed by the manufacturer for the provision of the same) for the installation of such safety changes, engineering charges or enhancements. 3 SCANSHIELD EXCLUSIONS FAPL does not provide warranty or maintenance support for any Product that exhibits physical damage and/or that falls under any of the following exclusions: a. Defects caused by the operation outside the usage parameters stated in the User's Manual. b. Product damage arising from system integration. c. Malfunctions caused by misuse or abuse, by improper installation, operation or maintenance, by improper connections or peripherals, by use of non-Fujitsu spare parts, by service modifications or repairs performed by a person not authorized by FAPL or by other conditions not arising from defects in product materials or workmanship. d. Malfunction or failure caused by accidental or intentional damage, or Product damage caused by any circumstances beyond FAPL's reasonable control. e. Defects resulting from normal wear and tear. f. All consumables supplied with the Products. g. Any transfer or assignment of ownership in the Product to any third party. The Warranty is provided only to the Purchaser as the original purchaser. h. Relocation of the Product outside Singapore i. Product damage or malfunctions caused by transportation of the Product. j. Purchaser shall notify FAPL in writing should any Product be relocated to a different site or location within 15 days from the date of such re-location. In the event that the Purchaser fails to notify FAPL as required, FAPL shall not be obliged to provide the ScanShield coverage to the re-located Products. k. Non-Fujitsu parts, associated Product and third party peripherals, memory expansion cards, PC cards or accessories. l. Product that has been defaced (such as label alterations, serial number missing, serial number no longer discernible, serial number invalid). m. Product with warranty labels removed or destroyed. n. Product damage due to lack of electrostatic discharge protection. o. Product purchased outside the sales territories of FAPL. For an up-to- date list, please refer to our website: http://sg.fuiitsu.com/scanner p. Non-bundled software. q. Product determined or suspected to be stolen or scrapped or other exclusions as published from time to time online at: http://sg.fuiitsu.com/scanner FAPL provides no warranty or maintenance support for Products that are purchased through unauthorized or foreign distribution channels or OEM or otherwise as part of the third party manufacturer's product or system. Purchasers of such products must seek warranty coverage, if any, through the purchasing source. FAPL may revise these exclusions from time to time. 4 DISCLAIMER AND LIMITATION OF LIABILITY The warranties stated herein are in lieu of all conditions and warranties, express, implied, or statutory, including but limited to any implied conditions or warranties of merchantability or fitness for a particular purpose on the part of FAPL and its affiliates, suppliers, service providers, agents and resellers. All implied or statutory conditions and warranties to the extent that they cannot be excluded are limited as set forth herein. If the product is defective in materials or workmanship, the Purchaser's sole and exclusive remedy shall be repair or replacement as provided above. However, if that remedy fails of its essential purpose, FAPL reserves the right to exchange with a similar or functionally similar product. EXCEPT TO THE EXTENT PROHIBITED BY LAW, FAPL AND ITS AFFILIATES, SUPPLIERS, SERVICE PROVIDERS, AGENTS AND RESELLERS SHALL NOT BE LIABLE FOR ANY DAMAGES INCLUDING, BUT NOT LIMITED TO, DIRECT INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF USE OR DATA, LOSS OF PROFITS, OR INTERRUPTION OF BUSINESS, WHETHER SUCH ALLEGED DAMAGES ARE BASED ON WARRANTY, CONDITION, TORT, OR CONTRACT (EVEN IN THE NATURE OF BREACH OF FUNDAMENTAL TERM). FAPL shall not be responsible for any loss, damage or delay caused directly by fire, explosion, lightning strike, civil unrest, war, earthquake, riot natural calamity, rebellion, sabotage, act of God or any other cause beyond the control of FAPL. The Purchaser hereby waives all or any claims to compensation monetary or otherwise which the Purchaser may be entitled to and shall agree to accept any compensation whatsoever by way of additional repairs or otherwise which FAPL in its absolute discretion may deem fit to offer. Except to the extent prohibited by law, the Purchaser as the original purchaser is only entitled to this exclusive written limited warranty. All rights to final interpretation for terms and conditions herein belong to FAPL. 5 CONFIDENTIAL INFORMATION THIS WARRANTY DOES NOT CREATE A RELATIONSHIP OF CONFIDENCE BETWEEN YOU THE PURCHASER AND FAPL OR ITS AFFILIATES, SUPPLIERS, SERVICE PROVIDERS AND RESELLERS. ANY CONFIDENTIAL INFORMATION SHOULD BE REMOVED PRIOR TO THE RETURN OF ANY PRODUCT TO FAPL. FAPL AND ITS AFFILIATES, SUPPLIERS, SERVICE PROVIDERS AND RESELLERS SHALL NOT BE RESPONSIBLE FOR ANY DISCLOSURE OF CONFIDENTIAL SOFTWARE PROGRAMS, DATA OR OTHER INFORMATION STORED OR USE ON ANY MEDIA OR PART OF ANY PRODUCT RETURNED TO FAPL OR ITS SERVICE PROVIDERS FOR WARRANTY SERVICE OR OTHER REPAIR, INCLUDING BUT NOT LIMITED TO ANY LOSS OR DAMAGE CAUSED BY SUCH DISCLOSURE OF CONFIDENTIAL INFORMATION. 6 GOVERNING LAWS AND JURISDICTION This ScanShield Certificate shall be governed by and construed in accordance with Singapore laws, and the Parties submit to the exclusive jurisdiction of the Singapore courts. Nothing in this document is intended to grant any third party any right to enforce the terms of this document or confer any third party any benefits under this document for the purposes of the Contracts (Rights of Third Parties) Act, Cap. 53B. FUJITSU ASIA WARRANTY SUPPORT CENTER CONTACT DETAILS For an up-to-date list, please refer to our website. Fujitsu Asia Pte Ltd 1 Fusionopolis Link #04-01 Nexus @ One-North, Singapore 138542 Attn: Imaging Product Group Tel: (65) 6512 7411 Fax: (65) 6512 7499 Operating Hours: 8.30am to 5.30pm (Monday to Friday) Closed: Saturday, Sunday and Public Holiday Website: http://sg.fuiitsu.com/scanner Email: scanner@sg.fuiitsu.com NOTE: These contact numbers are valid currently. Please check our website: http://sg.fuiitsu.com/scanner for the most up-to-date information. Fujitsu Asia Pte Ltd (hereinafter Fujitsu) endeavors to ensure tnat the information in this document is correct, but accepts no liability for any error or omission in the same. Any procedures described in this document for operating Fujitsu products should be read and understood by the Purchaser before such products are used. To ensure that Fujitsu products function without risk to safety or health, such procedures should be strictly observed by the Purchaser. The development of Fujitsu products and services is continuous and published information may not be up to date. It is important to check the current position with Fujitsu. Statements in this document are not part of a contract or program product license save insofar as they are incorporated into a contact or license by express written reference. Issuance of this document does not entitle the recipient access to or use of products described, and such access or use may be subject to separate contracts of licenses.

Warranty Information

LIMITED WARRANTIES
Limited Warranties are non-transferable. The following Limited Warranties are given to the original retail purchaser of the following Ashley Furniture Industries, Inc.Products:

Frames Used In Upholstered and Leather Products
Limited Lifetime Warranty
A Limited Lifetime Warranty applies to all frames used in sofas, couches, love seats, upholstered chairs, ottomans, sectionals, and sleepers. Ashley Furniture Industries,Inc. warrants these components to you, the original retail purchaser, to be free from material manufacturing defects.